Ghost Immobiliser Fitting
Guard your car from theft of keys, cloning and hacking with the world's first aftermarket immobiliser for CAN. The Ghost app and GPS tracking can be connected to the immobiliser to give you alerts when your vehicle is taken or damaged.
The installation of the Ghost immobiliser can be done by a certified technician. It is important to have the proper tools and heat shrink tubing.
Getting Started
Ghost immobilisers are a great alternative to physical theft devices such as wheel locks and car alarms. They safeguard your vehicle without using LED indicators or key fobs. They are directly connected to the ECU CAN data network and can only be activated after entering a PIN code. This provides a much more secure level of protection from key hacking, cloning, and even ECU swapping.
Installing a ghost immobiliser Birmingham requires a high level of agility and precision. It's like walking through a minefield. One misstep could cause serious damage to your vehicle's electrical circuits. ghost ii immobiliser is important to understand the procedure for installing and prepare your vehicle properly.
First, you must prepare the vehicle by taking out interior panels to make space for the immobiliser device. Once you have found the perfect location to conceal it then use cable ties to fix it. Then, tidy your wiring by making sure that loose wires are tied down and using insulation tape to cover exposed connections. This will help to reduce the risk of accidental short circuits as well as improving the appearance and reducing the possibility of tampering with by thieves.
Find a source of constant 12V power and an earthing point for the ghost immobiliser. Once you've located these connections, test the power cables using a multimeter to ensure they're delivering a consistent voltage. Connect the CAN H and CAN L wires of the immobiliser with the grounding and power points.
It is essential to double-check all the connections and inspect the immobiliser for signs of corrosion. You should also test the system to make sure it is working properly by entering a pin code and starting the engine. This should be a regular part of your routine as it will allow you to spot any intermittent problems early. Regular testing will help to extend the life of your device, and keep it running at its peak.
Preparing your vehicle
The installation of an Ghost immobiliser is a complex task that requires the right tools and expertise. A wiring diagram is crucial to identify the right wires, making accurate connections and ensuring safety. A multimeter can be used to verify electrical values and ensure security. Insulation tape and cable tie can be used to secure the connections and prevent alteration. A user's manual is available for your Ghost Immobiliser. It will provide you with specific instructions tailored to that model.
Once installed, a ghost immobiliser is able to prevent unauthorised engine start by requiring the owner to input a unique PIN code sequence through existing buttons in the steering wheel or center console. This can be accomplished manually or remotely through the mobile phone app and the code is able to be changed by the vehicle owner at any time. The device also operates silently and is unnoticeable to thieves as it doesn't emit radio frequency.
Ghost immobilisers are directly connected to the CAN bus of the vehicle, a network that communicates with the electronic control units (ECUs) of the vehicle. It intercepts signals sent by ECUs and shuts down the engine if a false one is detected. The system is weatherproof and tamper-proof. It has no keys or LED indicators to draw thieves' attention.
It can be positioned behind the dashboard or in a hidden area, so it isn't seen by thieves and doesn't interfere with the vehicle's performance. It can be mounted in a small container, so that it is less likely to be noticed by fraudulent salespeople when they test drive.
Its stealthy operation, along with its integration into the vehicle's CAN-bus system, can be a powerful deterrent to modern vehicle theft techniques, such as signal relay attacks and key copying. Combining the system with other security measures will create a powerful barrier that will deter even the most persistent of thieves. This is the reason why more insurance companies are now suggesting or even requiring ghost immobilisers to be installed, since they can drastically reduce monthly premiums.
Making Connections
Ghost immobilisers are completely silent, unlike traditional security systems, which can be heard by thieves. They stop thieves from knowing that your car is running. They also block high-tech methods of stealing vehicles like OBD hacking. They can also be installed without causing permanent marks in your vehicle, making them an excellent option for those planning to sell their vehicle in the near future.
The Autowatch Ghost 2 is a immobiliser CANbus that is among the most reliable and current solutions to stop car theft. It blocks your engine through the CAN data network and creates a unique PIN code, which is difficult for criminals. It can be used in various vehicles and is compatible with a variety of available features, including car alarms, GPS trackers and steering wheel locks and door bypass systems for locks.
If you decide to opt for an Ghost immobiliser, make sure to refer to the wiring diagram for your particular car model to identify the wires that require connecting. Verify their positions to ensure they are accurate, and label them or tape them to help you remember them. It is also necessary to locate a source of constant power (12V) and a grounding point to the system. Once you have these in place, you can begin making the connections to complete the installation.
If the ghost immobiliser has been connected to your CAN bus, it will stop your vehicle from starting until you enter a pin code through the buttons on the dashboard or steering wheel. This will stop ECU hacking keys cloning, hacking, and other methods of vehicle theft. Additionally, it can be paired with other approved by Thatcham security devices, like alarms and tyre clamps, to give your vehicle an even greater level of protection.
As the UK automotive industry grows, so do the options available to secure your car. With so many options for thieves to break in and take your car, it's vital to do all you can to protect it from being stolen. Ghost immobilisers have become an increasingly popular option for car owners who are responsible.
Testing the System
The Ghost Immobiliser communicates with the vehicle's ECU through an CAN network. This prevents the engine from being started until the PIN code is entered. This makes it extremely difficult for thieves to copy the key fob of your car and start your vehicle, and more difficult to disable the system through hacking into its electronics.
Ghost Immobilisers can also be used in conjunction with GPS tracking devices to help you locate your vehicle in the event that it is stolen. This feature isn't typically available in aftermarket security products however it's an excellent option to boost the security of your vehicle and give you peace of mind.
The Ghost-II immobiliser is not just a source of enhanced security but also provides a more convenient experience for the user, by not having to use additional key fobs or devices. It is simple and user-friendly PIN code entry that integrates seamlessly with your everyday routine. It also comes with convenience features and deactivation modes that let you to temporarily disable the immobiliser in order to park or service your vehicle.
Make sure you have the tools you need and familiarise yourself first with the wiring of your vehicle. A basic set of hand tools will give you the ability to create precise connections, while a multimeter can help check electrical values. Insulation tape and heat-shrink tubing are essential to safeguard connections from short circuits. Cable ties can also be used to secure wiring. It is also essential to work in a space which is well-lit and wear protective gear when working with electrical equipment and components.
After you've completed the installation you should test the Ghost immobiliser to ensure that it's functioning properly. First, you need to try to start the vehicle without entering the PIN code. If this fails then you'll have to retest and inspect the connections more thoroughly.
In contrast to other security systems that are available, unlike other security systems, the Ghost Immobiliser is a covert device that cannot be detected by thieves and is much more effective than traditional physical deterrents, such as wheel clamps or steering locks. It is TASSA acknowledged and approved by a few insurance companies, which makes it a cost-effective investment that can give you the peace of mind that you want.